Hydrothermal Carbonization of Sewage Sludge: Analysis of Process Severity and Solid Content

Hydrothermal carbonization of sewage sludge was carried out with the aim to evaluate the influence of process severity and initial solid content. Response surface methodology was applied to model yield and C yield responses. Enhanced dewaterability performance was recorded under mild processing conditions. The treatment promoted concentration and immobilization of Pb, Cd, Ni, Zn, and Cu. Variation of the solid content showed a stronger influence than severity on average yield and C yield. Higher heating values (HHVs) and energy retention efficiencies (EREs) of hydrochars obtained at the lowest solid content displayed the lowest values. Hence, the energy requirements of a first dewatering step should be compared with the related improvement in terms of HHV and ERE when sludge is used as feedstock.     

Influence of SiC content on the oxidation of carbon fibre reinforced ZrB2/SiC composites at 1500 and 1650 °C in air

The microstructure and the oxidation resistance in air of continuous carbon fibre reinforced ZrB₂–SiC ceramic composites were investigated. SiC content was varied between 5–20?vol.%, while maintaining fibre content at ～40?vol.%. Short term oxidation tests in air were carried out at 1500 and 1650?°C in a bottom-up loading furnace. The thickness, composition and microstructure of the resulting oxide scale were analysed by SEM-EDS and X-Ray diffraction. The results show that contents above 15?vol.% SiC ensure the formation of a homogeneous protective borosilicate glass that covers the entire sample and minimizes fibre burnout. The scale thickness is ～90?μm for the sample containing 5?vol.% SiC and decreases with increasing SiC content.     

Tough salami-inspired Cf/ZrB2 UHTCMCs produced by electrophoretic deposition

One of the biggest challenges of the materials science is the mutual exclusion of strength and toughness. This issue was minimized by mimicking the natural structural materials. To date, few efforts were done regarding materials that should be used in harsh environments. In this work we present novel continuous carbon fiber reinforced ultra-high-temperature ceramic matrix composites (UHTCMCs) for aerospace featuring optimized fiber/matrix interfaces and fibers distribution. The microstructures – produced by electrophoretic deposition of ZrB₂ on unidirectional carbon fibers followed by ZrB₂ infiltration and hot pressing – show a maximum flexural strength and fracture toughness of 330 MPa and 14 MPa m^1/2, respectively. Fracture surfaces are investigated to understand the mechanisms that affect strength and toughness. The EPD technique allows the achievement of a peculiar salami-inspired architecture alternating strong and weak interfaces.     

Microwave heating controlled reactive melt infiltration for graphite-Si-SiC ceramics manufacturing

In this work, we investigated a procedure which exploits microwave ovens to produce SiC- based components by reactive melt infiltration of silicon into graphite preforms. The employed oven is designed to grant optical access to the sample surface, which allows to measure its temperature evolution though a noncontact pyrometer. This signal was used as a feedback to control the power provided to the preform and as an experimental output whose analysis provides insight into the reaction mechanism. Specifically, it is found that complete infiltration is achieved much before the end of the reaction. The latter is not fully self-sustained as the global reaction rate continuously decreases with time until it is no more able to keep the temperature above the silicon solidification value. At that point, the reaction stops. The analysis of the processed samples proved that this procedure allows producing fully infiltrated samples without material failure by adjusting the heat provided during the infiltration stage rather than by tuning the preform structure and composition, which is the usual approach. The proposed method is less time and energy consuming than the standard one.     

Numerical Model for the Characterization of Retro-reflective Materials Behavior in an Urban Street Canyon

In this work, a preliminary numerical model of the behavior of retro-reflective materials used as envelope coatings on street canyon buildings fa?ades has been tested. Retro-reflective materials have a surface finish that allows to reflect the solar radiation back in the same direction of the incident radiation. In the last years this kind of materials has been studied as buildings envelope coating for their potentials in the reduction of the UHI effect. As a matter of fact, the angular dependence of their optical–radiative response would help to mitigate the phenomenon of radiative entrapment due to the urban fabric environment. For this reason, an urban canyon was selected as the most common urban architecture to perform the analysis. A virtual retroreflective material has been simulated considering its response as almost diffusive but in the same direction of the incident radiation. The assessment of the energy advantages of the adoption of a virtual retro-reflective material as envelope coating is investigated by means of a numerical model developed in MATLAB and based on the Gebhart factors theory. The final purpose of the numerical model is the evaluation of the surfaces solar loads by a comparison between perfectly diffusive materials and RR materials used as fa?ades coating.     

Cover Feature: A Comparative Study of in vitro Assays for Predicting the Nonspecific Binding of PET Imaging Agents in vivo (ChemMedChem 7/2020)

Nonspecific binding (NSB) is a key parameter in optimizing PET imaging tracers. We compared the ability to predict NSB of three available methods: LIMBA, rat f_u,brain, and CHI(IAM). Even though NSB is often associated with lipophilicity, we observed that logD does not correlate with any of these assays, clearly indicating that lipophilicity, while influencing NSB, is insufficient to predict it. A cross-comparison of the methods showed that all three correlate and are useful predictors of NSB. The three assays, however, rank the molecules slightly differently, illustrating the challenge of comparing molecules within a narrow chemical space. We also noted that CHI(IAM) values more effectively predict V_NS, a measure of in vivo NSB in the human brain. CHI(IAM) measurements might be a closer model of the actual physicochemical interaction between PET tracer candidates and cell membranes, and seems to be the method of choice for the optimization of in vivo NSB.     

Variation of internal structure and performance of polyethylene- and polypropylene-modified bitumen during blending process

Linear-viscoelastic characteristics and performance are evaluated throughout the blending process of polyethylene and polypropylene with bitumen. Results indicate that type, form and percentage of polyolefin play a significant role in the time evolution of the composite's mechanical response. Toluene extraction of modified bitumen revealed, for the first time, the formation of a sponge-like polymer network. Visual inspection and Fourier transform infrared analysis of the polyolefins recovered after extraction indicates higher affinity of the polyethylene with bitumen in agreement with the rheological test results. The use of polypropylene is discouraged if rutting performance is a concern, and polyethylene in both pellets and powder form at 4%, and after 210 min of blending produces a modified bitumen with acceptable performance.     

Unipolar plasma electrolytic oxidation: Waveform optimisation for corrosion resistance of commercially pure titanium

This study deals with the anodisation of titanium grade 2 in 0.5-M sulphuric acid using a pulsed signal in a unipolar regime. The electrical parameters investigated are voltage, frequency and duty cycle. The use of duty cycles with a high percentage of anodic polarisation (90%), combined with high frequencies (1000 Hz) and the higher voltage tested (220 V), favoured the establishment of a plasma regime involving strong dielectric discharges, allowing the growth of thicker oxides but with rough architecture. The corrosion resistance of the formed film has been characterised by potentiodynamic tests in 0.5-M NaBr for localised corrosion resistance and by immersion tests in 10% v/v sulphuric acid solution for a uniform corrosion assessment. Current–time curves, visual observations and electron microscope analysis (scanning electron microscopy, energy-dispersive X-ray spectroscopy) were the tools selected to provide a correlation between technological parameters and oxide growth mechanism. For localised and uniform corrosion, anodisation at 220 V with a high level of anodic polarisation (90%) and frequency (1000 Hz) was verified to be particularly advantageous.